|
NC1000 Night Vision IP /Network camera features a standalone system,
which means a camera and a computer combined in a small package.
Built-in A/V encoder module and web server provide users to view
images through IP network (LAN) with a browser on any
computer connected to network. And it can be installed easily
and friendly by using a IP configuration software to assign an IP to your IP camera.
Includes snapshot/motion detection/FTP/e-mail alert and professional
CCTV "secu vision" software for IP cameras
>Up to 30 FPS Performs High Quality Service to Multiple Users
>Motion Detection Supports Upload Images to FTP
& EMAIL >GPIO Enables External Trigger and Motion Alarm
Output
>Built in Microphone Brings Users More Than
Video Only >View with Browsers No Specific AP
Needed > Remote Record and
Snapshot Control on Web
Camera
-1/4 Inch Color CMOS 307,200 Pixel Sensor
-640x480/320x240/352x288/176x144
-2.5Lux / F1.4
-Automatic Exposure Control (AEC)
-Automatic Gain Control (AGC)
-Automatic Brightness Control (ABC)
-Automatic White Balance (AWB)
-Electronic shutter: 1/60~1/15,000sec
Lens
-Standard C/CS Mount Type, 6.0mm, F1.8 Image
-Image Frame Rate: Up to 30 Frame Per Second
@ VGA, Up to 40 Frames Per Second @CIF
-Compression: JPEG Image, MJPEG Video
Video Quality Level: 5
Resolution: 640x480, 320x240, 352x288, 176x144
Audio Support
-PCM / ADPCM
Hardware
-CPU: 32 Bits RISC Processor
-One RJ-45 for 10/100 Fast Ethernet
-IR LED (Option)
-2Di / 1Do for User Define
Protocols
-TCP/IP, SMTP, HTTP, FTP, PPPoE, DHCP, DDNS
Installation
-Via Configuration S/W or Web Config
System Requirements
-Operation system: Windows 98/Me/NT/2000/XP, Linux, Mac
-Browser: Microsoft IE5.x, 6.x or above, or Netscape
Navigator 5.x or above
User management
Up to 20 Users Log in
-2 Layers Username & Password Protection.
GPIO & Trigger
Support
Motion Detect
3 Level Sensitivity Detection
Alert / Record via E-Mail or FTP When Triggered
FAQ
|
|
